Monday, April 12, 2010

A Notch in Time...




A Notch in Time…


By Tim Ard, Forest Applications Training, Inc.


In the past couple months I have led training workshops and demonstrations in several areas of the country and met several people who have been operating a saw for years.


Preparing for the eVideo I watched a passel of videos online that show felling, bucking, limbing and other chain saw techniques that cover and display a wide range of skill and applications. Hundreds of face notches, bore cuts, miss-matched cuts of various configurations are visible on these websites. I have heard statements of how techniques used originated and how they have been “the way I’ve always cut”, they say.


I have been following chain saw training in the USA very closely since 1983. Even before that, in the late 70’s, I remember the name Soren Eriksson in and on chain saw related materials from Scandinavia. Jonsered and Husqvarna had Soren in pictures, films and poster materials back in the early 1970’s. Soren made some of the first training visits to the USA in the late 70’s working on projects for Weyerhaeuser and Westvaco wood products companies. Jonsered distributor, Tilton Equipment organized many workshops with Soren and Dan Tilton was one of the first to begin spreading Soren’s Swedish Logging Techniques throughout our country.


The first time I met Soren Eriksson was in 1983 at a Stihl function but it was in or about 1986 when I finally was afforded the opportunity to assist in putting on a demonstration in South Georgia where Soren was brought in to work with a group of loggers for the Stihl Distributor Meier and White Equipment. At that time I was the Shop Manager for MWE and was responsible for technical training. I held some basic chainsaw safety meetings for local dealers and power companies but it wasn’t until the logger workshop that my eyes and ears were open to the possibilities and huge need of training for the chainsaw operator. Logging was Soren’s focus venue but I knew the techniques were something that could change all chainsaw operators everywhere.


I researched it heavily and it was Soren Eriksson who had pioneered the techniques of “Open Face” and “Bore-Cut” into the USA but the real accomplishments of his techniques; Soren Eriksson brought thought, safety, planning processes and professionalism into USA chainsaw operations. Soren’s major promotion arm in his early days in the states was the American Forest Resources Association (at that time called the American Pulpwood Association) and Dave Zerfoss of Stihl, later US President of

Husqvarna. Soren’s training really took off when he and one of Scott Paper Company’s foresters organized the first Game of Logging.

When I went to work nationally for Stihl was when I began to travel with Soren and organize his training and the GOL events. I wrote the above to more or less illustrate this in the timeline…. There was not any use or discussions of big notches and bore-cuts before Soren Eriksson brought them to the USA through his training programs. When I became involved in promoting Soren Eriksson and his training with Stihl and later Husqvarna, I can assure you not many knew anything of what he was doing and fought against the training and techniques in both the eastern and western states.


So from now on, when you make that face notch you have always made, bore-cut to establish a hinge you have always used, after putting together a five step felling plan you’ve always used-- you can say a quick thank you to Soren Eriksson – a logger and training instructor for bringing them to you. Yes, those logging techniques work well for Tree Care, Logging, Government Crews, Disaster Volunteers and me and you! Every recognizable training organization in the USA teaches with Soren’s techniques and training formats. They just make them their own… they think!



Thank you Soren for being persistent in training, techniques and design to make our chainsaw work safer and more productive.


Good Sawing!









Friday, April 9, 2010

Tough Brakes...


Tough Brakes….


By Tim Ard, Forest Applications Training, Inc.



Innovation takes time to be tried, tested and perfected. New ideas taken from concept to commonplace often take decades.



The chain brake has been readily available on chain saws since the early 1980’s. It was designed and available as an accessory to certain chain saws a


few years prior. The chain brake has proven its worth in saw safety and has become standard equipment on most chain saws for close to thirty years. In my opinion it is one of the most significant developments in safety of the chain saw operator to ever be offered to date.



Today a couple manufactures are competing to make the chain brake system even more user friendly and better fit the applications of current chainsaw operators. Retaining operator productivity and offering new designs for improved brake operations has challenged manufacturers.



In my training I emphasize awareness of the reactive forces of the cha


in saw and discuss the chain brake working to stop the chain rotation giving the operator greater reaction time. I also discuss the important technique of using the brake system as a parking brake. When you take a hand off the saw the chain brake can go on to remove some chance of the spinning chain coming in contact with the operator. Applying the brake before removing a hand and then release the brake to begin work removes a lot of incident potential.



Two manufacturers, I am aware of, have added new innovations in chain brake designs to a couple saw models. Stihl(R) and Husqvarna(R) are reviving the Battle of


the Brakes.



I requested a Husqvarna(R) saw with a TrioBrake(TM) for evaluation to compare to the Stihl(R) C-Q Brake. I was hoping to compare side-by-side but to date they haven’t sent the saw. So I am going to complete the comparison, evaluating the TrioBrake(TM) saw at a later date. I have included my findings on the Stihl(R) unit. So enjoy!



In the following review I have written the evaluation of the machine basically right out of the box. I reviewed a fresh unit with the open mind of an operator and/or a chainsaw mechanic… Here are my findings.










Stihl(R) MS 362 C-Q



First Impressions: CES Rating* – 5



Unpacked the saw from the box, filled it with bar oil and 50Fuel (Your Stihl(R) dealer will do the set up for you). The engine started (from dry) in 4 pulls with compression release on. Compression seems good on the unit right out of the box. I’ve had problems starting some new saws in the past using the compression release before the engine is broken in. Saws are usually a little hard to start until the compression gets seated. The MS 362 starter system is smooth with or without the compression release engaged and the recoil rope didn’t attempt to snatch my fingers (some light weight, high compression saws will jerk at your fingers when you pull the rope, this one did not at all).




The chain oiler primed quickly and was ready for use in less than a minute with sufficient oil all around the bar surface.




I warmed the saw up and ran it up to top rpm. High speed had a good flutter. It seems like there may be a governor system in the saw but the tachometer didn’t show any change in reading so, I assume the compensator designed air box is managing the situation and not electronics. The high speed no load is said to be 14000 rpm in the owner manual. I left the adjustments a little rich on the high screw for a couple tanks of fuel, just to get everything seated and broken in a bit. I have since turned it up to just under the 14k (maximum) since I have several tanks through it now. Carburetor adjustment is easily set and is very consistent on this engine. The fuel economy (gas mileage) is much better at the proper setting and runs out well with little smoke from the exhaust. Good deal!




The air filter element is a two-stage design and is fed with pre-cleaned air pulled (or pushed up) from the flywheel area creating a three-stage air cleaning system. The two cleanable elements however are a little tricky to reinstall, you have to take your time and get them seated correctly. I will practice a bit on it and see if it’s me or design. Right now it’s easy to distort the element shape and you have to really be particular that the filter seals to its mount. Sawdust gets around the top edge of the pre-filter element easily if not. The total (three stage) filter system seems to stop all particles however with the primary element the last stop before the carburetor throat. Tapping out the secondary pre-filter occasionally throughout the workday keeps the primary element virtually clean as new.



Checking the fasteners right out of the box, I found the screws slightly loose on polymer parts but all others were tight on the crankcase, carburetor area and starter housings. After running it for several tanks all the screws are still snug. Top covers on saws are notorious for screws that vibrate loose. The MS 362 has twist locking style fasteners (similar to Dzus®) on the top cover that hold it down securely and are ready for 200mph plus. This type of fastener has been used in racing applications in the auto and motorcycle industries for years, glad to see them used here. They are quick and they work!




The new chain brake system on this MS 362 is much improved. The first Q-C units I observed and ran in the field with the two-position chain brake activation, I had difficulties performing carburetor adjustments, chain sharpening and chain tensioning because of the rear brake activation lever. It was a two-person task, as someone had to work the two brake controls. It seemed in the earlier versions, the brake levers were somehow tied together and it was hard to work independently with these areas, performing adjustments. On the new version the system now works like a usual brake lever in front with the added rear release lever activating the brake if your hand is removed from the rear handle. When your hand is removed from the rear handle the brake is applied. If the front brake handle/guard is engaged forward, the brake is applied. It engages in two ways to tighten the brake band to the clutch drum during work applications. Stopping the rotating saw chain quickly.



The brake system also engages with a push or kick of substantial force. It is designed to be inertia activated. I found it to take a fairly strong inertia force to trigger the front brake. I couldn’t get it to trigger in a fairly strong kick on the tip. I had to drop the saw bar hard into a wedge (without it running) to trigger it. So the inertia feature is working but shouldn’t trigger without reason and if the saw operator actually lost control and the saw left their hands, the release of the grip on the rear handle would immediately activate the brake because of the rear activation feature. In all - the new system works super for reactive force situations as well as loss of control scenarios such as slips and falls. That is a great feature!




Fit and finish of the MS 362 C-Q is very precise and the see through fuel tank is a great feature. You can observe fuel volume quickly during operations without opening the tank cap. The fuel cap and the oil cap take some added attention to make sure you start the twist locking action in the right place. If you don’t start the twist in the right position, when you flip over the twist lock, the cap will leak around the seal. With a little practice it’s not really a problem, unless you do not start it right.



I haven’t put this much run time on a StihlÒ saw in several years. I found it to be a pleasurable experience. Especially since the AV system is now spring mounted- it’s firm but has very little vibration felt at the handles. The two-position chain brake activation is the reason I wanted to run the saw and I am glad I did. It’s a new system that has great potential of reducing loss of control lacerations and reactive force incidents of chain saw operation.



I have used the MS 362 C-Q in several training classes now and feel very confident it can offer added safety to operators who for some reason have a habit of removing a hand from the rear handle to grab or move an object or brush. It’s a great innovation in chainsaw safety advancement. I endorse this innovative unit and highly recommend it for your chain saw applications.



For more info on the MS 362 go to http://www.stihlusa.com/chainsaws/MS362CQ.html











* To define the ChainPoint Endorsement System (CES Rating) use the following 1 through 5 rating.





  • 1- 1 Not impressed at all– back to the design bench


  • 2- 2 Could have limited applications


  • 3- 3 Suggest closer evaluation


  • 4- 4 Recommend it


  • 5- 5 Endorse - Highly Recommend it







Saturday, April 3, 2010

Easter ChainPoint

Hi Everyone,

It has been a very busy three weeks. It seems getting ready for the Rugged Quarter Training, the great week of training following the preparation and then a quick training trip to SC filled the past two to three weeks exceptionally. It was a great time!
The latest ChainPoint eNews...

  • I have written a few comments in follow-up to the recent wedge article. It’s found below.

  • The Rugged Quarter workshop produced a winner. Adam Fyfe took the high score position and kept the Husqvarna 575xp (my last prize saw- thanks Husqvarna for supplying over the years).


  • We are tentatively planning two other Trainer Workshops for later this year. One is being discussed for California and the other in the Memphis area. Stay tuned to ChainPoint for more information on these. The first one at RQ was a huge success! Thank you Bill and Juli for making it possible and producing the winner too. I also want to thank several of the ChainPoint manufacturers for supplying some other samples to the trainers; Gransfors/Woolpower, PFERD, TrueFuel50, Oregon Cutting Systems, and Elvex. (http://www.forestapps.com/chainpoint/chainpointhome.html ) Thank You!

  • The eVideo Introduction DVD’s are in the house and we are preparing to mail out the first 150 free ones in the next week. They look great! Rob Lagerstrom at Streamline Studio did a super job! If you didn’t get in line for the first 150 free grades' via TruFuel wanting to introduce you – you can order your copy for $19.99 from the eStore at http://www.forestapps.com .


I pray that you and yours have a super and safe Easter weekend and realize the Grac

e that was given to each of us on this weekend in Jerusalem hundreds of years ago. Know the Gift is Yours!


Good Sawing,
Tim Ard
Forest Applications Training, Inc.

O
770.222.2511

www.forestapps.com


A Wedge Up...
By Tim Ard, Forest Applications Training, Inc.

Comments and questions came in from readers of my recent wedging article. One was regarding compression of the fibers and lift potential at the wedge site. During the RQ workshop I

lifted two trees to illustrate heavy wedging techniques. One of them a white oak with more than12 feet of back lean and the other an 18” with 5 feet back lean on a soft pine. Both were successful and no fiber compression was encountered.

The first of the trees, a 10” white oak, I placed three wedges to lift it just over 10 feet.


The pine, I did not get a picture - but 14 witnesses can attribute to the lift of the weight with double stacks at 90 degrees and there was no measurable fiber compression at the wedge sites.

So many times the notch, hinge, top obstructions cause the plan to be unsuccessful with wedging but with a little understanding and practice wedges are amazing. One of many tools in the box....

I mentioned several times at the RQ that ropes and wedges both do the same work- they lift or support. The real work is done and safety comes from the hinge. With these two trees you would have had to
been there to realize the strength of the hinge. The Hinge=Friend!

Good sawing!

Saturday, March 27, 2010

March 2010 Rugged Quarter Workshop

March 22-26, 2010

Monday the 22nd at the chainsaw safety workshop we had a total of 18 in attendance and then 14 completed the rest of the week’s Train the Trainer workshop at the RQ near Trussville, AL.

The class consisted of attendees from Tree Care, Fire Services, Forestry Equipment, Land Management, Training Organizations and the Department of Homeland Defense. All of whom wanted to absorb as much as they could from the material, presentations and from the other attendees during the five days. They did just that!

IMG00816-20100326-1135

A very attentive group and very talented also…. IMG00818-20100326-1406

The winner of the three days of Competitive Response was Adam Fyfe. He was consistent in all the hands-on events and led the way. All the way to a grand prize of a donated Husqvarna 575xp. Congratulations Adam!

Special thanks to Oregon®, PFERD, TruSouth Oil (50Fuel), Gransfors Bruks, Elvex and Husqvarna for the products and prizes.

Good Sawing,

Tim Ard

Monday, March 15, 2010

Angled Back Cut

From: John R.

Sent: Monday, March 15, 2010 9:21 AM
To: Info@forestapps.com
Subject: Angled back cut

Tim, I live in an area of the country where a good deal of the populace like to employ the sloping back cut when felling trees.  Getting them out of the habit is a little like trying to explain why "mulch volcanoes" around landscape plantings is not a good idea.  People hear it, but don't "buy" it. Any additional comments from you would be appreciated.  Thanks.

John R.

 

Hi John,

Sloping back cuts from a safety standpoint probably do not have an issue. You can present the following line items as somewhat limitations.

1. If the tree begins to move, as the sloping back cut is at a high level above the notch apex, the fiber pulls apart splitting vertically instead of breaking from the back of the hinge to the front at an even rate. So if lifting with a wedge or pulling with a rope this separation can possibly cause “barber-chair” in the trunk.

2. Wedging the angled back cut pushes against fiber and separates vertically where as a level back cut lifts and breaks the fiber from back of the hinge to the front.

3. As the tree’s weight transfers forward with the back cut high and angled above the notch cut, the entire weight of the tree can collapse the fiber. Support is lost for side weight or lean. The tree can twist because of the crushing fiber. When the back cut is level, and at the level of the face notch, there is only movement the width of the saw kerf behind the hinge. Limits some of the chance of twist.

4. The back cut level to the notch apex, instead of angled down, can better insure the fiber planned in the hinge width. If the back cut is high and angled and the fiber at an angle in the hinge area, there is a good chance that the hinge is completely cut when you have anticipated and planned a given hinge width.

Some quick thoughts…. Better explained with a hands on class to demonstrate.

Good Sawing,

Tim Ard

Saturday, March 13, 2010

Guide Bar Question

 

Have you had occasion to use the WoodsmanPro Bar Rail Closure from Woodland International, Inc?

I have had one for a few years but the jury is still out on it's effectiveness/need. Granted, I probably used it less than half a dozen times. Any thoughts?

John R.

FRSP

Hi John,

I have not used the Woodsman bar rail closer but I have used similar tools over the years.

They are nice to quickly straighten up pinches in the field. You can open the rail of a pinched area and then use the tool to even things. You can also close an entire rail to better match the drive links gauge as the bar starts to wear. It is a patch however...

When the chain runs in the rail it moves from side to side (rocks left to right). This causes a "fishtail" looking wear inside the lower end of the bar rail that only a regrind or replacement will correct. The rail closers just push the top of the rails closer together so it's kind of a patch not repair.

Hopefully that answers your question... Thanks for sending it. Always good to hear from you. It is a good tool to keep in your box for those occasional uses.

Good Sawing,

Tim Ard

Forest Applications Training, Inc.

Phone: 770.222.2511

http://www.forestapps.com

We have an eStore for items discussed in our programs... eStore

Monday, March 1, 2010

Two Specs….

clip_image002

Hi Everyone!

A new month and Spring is in the air!  The clean-up and yard work begins as soon as weather warms. I can’t wait!

The ChainPoint ProLink for March is posted – check it out  http://www.forestapps.com/chainpoint/chainpointhome.html

The March Special is posted at the eStore also…. Time to try a case of 50Fuel.

There is one slot open in the Train the Trainer Workshop March 22-26th . However the Monday 22nd  Demo Workshop is wide open. If you have a Church group, business, friends or just anyone who may want more chain saw knowledge that  would like to visit Trussville for the 22nd workshop have them register. Cost is $50 and includes a T-Shirt and Lunch. Groups may contact me for discounted rates. Register online at our website….

The Trussville/Leeds, AL area has the Bass Pro Mega Store and Barber’s Motorcycle and Motorsports Museum. Let alone the beauty of the Rugged Quarter. Hotel’s, restaurant’s are plentiful and reasonable.

The first day workshop is important to the training element for the participants in the rest of the week activities. Come on out, participate and enjoy!

Take a minute and invite your friends to go to our website and subscribe to ChainPoint so they can be connected to this elite group! Thank You!

Please read the article below on Two Specs. It’s an important one as we begin the Spring work around the job and home.

Good Sawing,

Tim Ard

Forest Applications Training, Inc.

Phone: 770.222.2511

http://www.forestapps.com

We have an eStore for items  discussed in our programs... eStore

Two Specs       

By Tim Ard,  Forest Applications Training, Inc.

Or maybe the title should be bi-focal? When you are operating a chain saw you should not hesitate to have your eyes covered with safety glasses. It is even a good idea to add a face screen when you are working debris on the ground. 1

For sure your eyes are a valuable commodity that you do not want to be without. You wouldn’t run a chain saw in total darkness would you? Why would you plan to do that very thing by not considering safety glasses anytime there is potential for eye injury? One unexpected, unplanned event (accident) and you possibly won’t run the saw in daylight again. It will definitely slow down saw operations for all time.

When operating a saw, trimmer, clearing saw or just performing maintenance or sharpening -safety glasses must be worn. The potential for eye injury is present at all times when undertaking these tasks. I just started a small engine in the yard one day and a piece of rust from the exhaust muffler blew upwards into my eye. It had enough force to pierce the edge of my eye and the doctor had to remove it with what seemed to be a magnetic drill bit. Yes, if it sounds gross to you-- I can tell you it’s not a pretty sight when it’s headed toward your eyeball either. I never knew how closely related your eye is to your stomach as nausea set in quickly.

Often in training classes I hear comments of, “I can’t see clearly through safety glasses, they seem distorted.”  The minute I start to work, “they fog up.”  “I have to wear prescription glasses and I can’t afford $350 safety lenses and side shields.” These are all valid reasons safety glasses are often left on the truck seats and shop tables but it doesn’t answer the need for them to reduce the chances of eye injury. Today there are technologies that make the excuses disappear…

Distortion

Safety glasses today from companies such as Elvex, who have improved the manufacturer of hard polycarbonate coated lenses, are completely distortion free affordable lenses. These safety lenses can be clear, indoor/outdoor, yellow, grey and dark tints that all block dangerous UV’s and protect your eyes from HFO’s (harmful flying objects).

Fogging

Safety glasses now have coated lenses that have scratch and fog resistance. There are also cleaners with anti-fog properties that can help prevent collection of facial oils and moisture that immediately make fogging a problem. On the web one product called C-Clear is getting high reviews.

Bi-focal Optics

Since the time I turned forty-two (thirteen plus years ago now) I have been wearing two sets of eyes. I tried to make it through with just regular safety glasses but no way to see anything up close. Contact lenses are just not for me either, especially with all the dust I am around. So, I tried a couple safety glasses with bi-focal inserts and also the plastic film inserts on the market for about a year. They just didn’t offer a solution, too much distortion and I always seemed to get a headache. I decided to spring for a pair of prescription safety glasses and sprung I did to the tune of about $240. I really used them too long, about three regular eyeglass prescription upgrades and then last year I paid $380 for a new pair.

In January I received a pair of Elvex RX 400’s in 2.0 magnification bi-optics. The soft ear pieces sealed great under the ear muffs and the lenses are so clear. I wore them for less than a day to find the bi-focal optics worked great whether walking in the woods, sawing or sharpening. The cost a fraction too… Safety glasses with bi-optics are available with magnifiers ranging from 1.0 to 3.0 to accommodate most reading and work environments.

So, the excuses are reduced to a minimum by the aforementioned paragraphs. The need for safety glasses is indisputable when tackling power equipment operations. You can now find products available that will work for you. Try it please-- do so for more than a couple days, give them an honest try before abandoning them and remember for many occupations it’s the law.  Your Two Specs are worth the time, effort and money expended to protect and keep them!

If you have any questions about the items mentioned in this article please send them to info@forestapps.com. Links can be found to explore on our website and eStore at www.forestapps.com.

1 In the workplace these items are part of the PPE requirements of a chain saw operator under OSHA 1910.266. Make sure you are in compliance for two reasons- your safety and it is the law.

clip_image002[4]

Elvex RX- 400   Bi-Focal

Good Sawing!