Monday, May 3, 2010

Barnes and Noble...

On this weeks ChainPoint I mistakenly left off a link to Barnes and Noble eBooks. If you don’t have a copy of the Forest Applications eBook now is the time to order it while on sale at B&N. The version doesn’t have the video clips but has everything else... You can go to our website and order the eVideo Intro DVD and have the video information in High Definition DVD to go with the eBook.



http://search.barnesandnoble.com/The-Complete-Guide-to-Chain-Saw-Safety-and-Directional-Felling/Tim-Ard/e/9780615319230/?itm=1&USRI=tim+ard?tabname=custreview



One of the best gifts you can give you Mom for Mother’s Day is your chain saw safety.... Order your copies today.


Good Sawing,

Tim Ard
Forest Applications Training, Inc.


Sunday, May 2, 2010

Blandford, MA...

The first of the week we have a three day class with Batstate Roads. The third day will be an awesome day of storm damage. Mark at Blandford has set up some storm situations for us to work on. It looks tough... we will see.

 

Good Sawing,

Tim

Friday, April 30, 2010

MIIA

This has been a great week! This was our second time of training with the MIIA organization in Massachusetts. Started last year with them and it is exciting to work with them. They are a risk management and worker's comp provider for town DPW workers and Police and Fire employees. I can tell you they care about the workers...


The organizer and contact for our work is Lin Chabra. She does a super job getting everything organized with the townships. We have presented to 125 town representatives across the state from the Cape to the NY border. A great group of saw operators and Lin and MIIA's office and field staff did such a great job making all of them feel appreciated.


We will be back with them again in the Fall - looking forward to it for sure...


Good Sawing,


Tim Ard



Thursday, April 22, 2010

Chain Tension...

How To Tension Your Chain


by Mike Kelly Field Services Manager Oregon Cutting Systems


Never tension your chain right after cutting. Chain tensioned while hot can cool and shrink,


causing tension to be much too tight. REMEMBER- LET YOUR CHAIN COOL FIRST.



  • when tensioning your chain always wear protective gloves


  • Turn engine off. Let chain cool


  • Loosen the bar-mounting nuts on the side of your saw.


  • Pull the bar nose up, and keep it up as you adjust the tension.


  • Adjust tension accordingly:



Solid nose bar- Turn your saw's tension-adjustment screw until the bottoms of the lowest tie strap


and cutters come up and just touch the bottom of the bar rail.



Sprocket nose bar- Tension must be tighter than on a solid nose bar. Turn your saw's tension-


adjustment screw until the bottoms of the lowest tie straps and cutters come up and contact the


bottom of the bar rails, at this point add a quarter of a turn to your tension adjustment screw.



  • With either type bar, hold the nose up and tighten your saw's rear bar-mounting nut first, then



  • tighten the front nut.



  • You should be able to pull the chain by hand along tie top of the bar several times, from the


engine to the bar's tip, Chain should feel snug but still pul1 freely.



  • If you have a sprocket-nose bar you should now perform a snap test. Grasp the chain along the bottom of the bar, pull down, and let go. Chain should snap back to its original position, solidly contacting the bottom of the bar.



  • Check tension often during operation, especially during the first half-hour. If chain loosens: stop,



  • let chain cool, and readjust tension.



  • Improperly adjusted chain can result in premature bar wear and chain wear.


REMEMBER: MORE CHAIN AND BAR PROBLEMS ARE CAUSED BY INCORRECT CHAIN TENSION THAN BY ANY OTHER SINGLE FACTOR.


Oregon Cutting Systems, Division of Blount, Inc. 4909 SE International Way


PO Box 22127, Portland, OR 97222-2127


Return to Forest Applications



Wednesday, April 21, 2010

Susanville, California Workshop

We are holding another Train the Trainer Workshop, this time in Susanville, CA July 19-23, 2010. The TTT workshops are not only for instructors but for anyone who wants to be able to explain what they learn and pass it to others.



Information can be found on the ForestApps website at



http://www.forestapps.com/training/California2010.html

If you know of anyone who would like a training experience in chain saw unequaled anywhere... tell them to register for Susanville.




Tuesday, April 20, 2010

Bucking Storm Debris...

We had a small group today and we did a little work with some storm situations. It is so impressive when plans are made following some guidelines. I don't know if there is a great way, or best way, to organize your thoughts before making a cut but we had some super results from this planning format:



1. Hazards



2. Roll or Twist - side pressure



3. Up and Down pressures



4. Back and Forward pressures



5. Make the cut



If you take the time to go through these steps you will ultimately reduce the time you are hung in the limb or log and surprised much less by quick unexpected happenings.



One advantage of this five step plan is to quickly agree with the rest of the crew as to what to do. Without a defined planning process you are probably going to spend more time discussing what could happen rather than taking the information, confirming the plan and agree upon actions to get the job completed safely and efficiently.



Most important - once you have a plan for the cut, choose a technique from the toolbox that works. The notch and hinge used for felling works in bucking scenarios too. You don't always need a big, wide notch because there may not be enough movement required for a large opening but just sliding the bar across the compression side makes a notch of sufficient operation to reduce twists and gain control.



The new Storm Debris eVideo is going to be an awesome training / review tool for outlining this process and open a lot of eyes to how great the system works.



Good Sawing,



Tim










Monday, April 19, 2010

Two-Cycle TroubleShooting


One training class that's fun to do and very important to chain saw users is the two-cycle troubleshooting workshop. The class is a tear down session that investigates the four areas of two stroke theory and design.


Air - Spark - Compression - Fuel

These areas are are discussed in detail as the saw power heads are torn down and reassembled. The course is not designed for the mechanic bit rather an operator. The concept is that an operator can Reduce Down Time and keep a saw running longer if they understand the workings of the engine.

One subject that is very important today is the Fuel section. Participants take apart carburetors and understand the effects of fuel (like Ethanol Fuels) on the carburetor body and how important adjustments are to the life of the engine.

To find out more information you can look under programs at http://www.forestapps.com or contact info@forestapps.com .

Good Sawing,

Tim Ard