Wednesday, June 15, 2011
Going Ballistic!
By Tim Ard, Forest Applications Training, Inc.
If I understand how something works- I better understand the need for it or maybe how to use it. Chainsaw operators have been going ballistic over leg protection for many years now. I want to share with you a few thoughts.
The term ballistic nylon is used to describe the fibers recommended for leg protective (PPE) garments for the chainsaw. It actually is derived from fibers used in making bullet resistant body armor. One of the first and still used today is Dupont Kevlar, a very strong and durable yellow colored fiber. Fibers of this type were first developed and used in belting for automotive tires and other applications requiring reinforcement with flexibility. This reinforcement fiber was heat resistant as well as strong and soon found it's way into leg protection for logging and the US Forest Service. The USFS requires the fabric to be highly flame resistant because of their use related to forest fires.
Today there are several fiber types used for chainsaw leg protection. Many people still consider the fibers used in all leg protection as "Kevlar", similar to many call soft drinks a "Coke."
Whatever you call chainsaw leg protection fiber, it is the best insurance we can wear against chainsaw injuries to the legs. Let me state something here - No leg protection is to be considered cut proof. It is designed to give you reaction time and hopefully limit, lessen or reduce, the injury should the chainsaw come in contact. Several Manufactures test their pads and garment design to the ASTM standards for the North American Leg Protection Standard. Look at the label on your chaps, or the ones you are considering, you should find a label showing their compliance to this standard. Usually you will find the label of classification to the standard by the Underwriters Laboratory (UL) that performed the test.
Now understanding some of the technical aspects of leg protection let's discuss some typical concerns that may inhibit their use.
During a recent storm clean up following tornados in North Georgia, one of my good friends, Robert Albritton of Tree Works Unlimited observed a chain saw operator without any PPE. Robert, wanting to offer help to those volunteering, asked the young man if he were to get him a pair of chaps from the truck would he wear them? The young man replied, "I wouldn't want to mess up your chaps sir." Robert told him not to worry about that, but still no way he was going to accept Robert's offer. Robert is a professional who recognizes the importance of PPE with his employees and himself. When an unplanned incident (accident) with a chainsaw takes place, two top at risk areas for lacerations are - the legs.
Folks (being a Southerner and caring), you can compare chaps to ballistic body armor here. You can be a soldier or police officer without body armor but if you get hit by a bullet would you want to have it or not? The same is true relating to leg protection while using a chainsaw. Why wouldn't you want to make the investment and take the time to put it on if it could save your life or limb?
The past year I have had the opportunity to learn a great deal about products from Elvex Safety. Their leg protective pads designed with Prolar Fabric is a combination of white fibers layered specifically for chainsaw protection to maximize the chain jamming effect. If or when the chainsaw makes contact, these fibers work hard to maximize reaction time. It's not just the fibers, it's also how the woven pads are arranged and layered. Elvex works well!
Thinking about Going Chainsaw Ballistic? Consider Elvex Safety...
Learn more about leg protection with information and video presentations on the www.Elvex.com site ( http://www.elvex.com/chainsaw-chaps.htm ). There is a video showing the parameters of the ASTM testing ( http://www.youtube.com/watch?v=btgEjO5YQis&feature=youtube_gdata_player) and also one showing me cutting into a chap leg. When you see the Prolar Pads in action you will agree as I do... Never operate a chainsaw without them!
Good Sawing!
Tim Ard is president of Forest Application Training, Inc. http://www.ForestApps.com . Elvex Safety is a sponsor of Forest Applications Training Programs.
- Posted using BlogPress from my iPad
Tuesday, May 31, 2011
Planning A Storm
By Tim Ard, Forest Applications Training, Inc.
To plan a storm… sounds strange doesn't it? We really shouldn’t need to plan a storm; they seem to happen too often and too frequently as it is. There is some type of storm, flood or natural disaster that seems to be taking place somewhere in the U.S. and around the world daily. So why plan?
When the storm hits, no matter what type and where, one of the first tools that’s requested and called into action is guess what? The chainsaw. Thought of to be one of the top dangers of all tool operation, second possibly to only the devastation of the storm itself, is called into action to begin the clean up operations. So why plan? Why plan the storm?
An accident is an unplanned event! So, during storm clean up, here are a few scenarios to consider planning around:
A volunteer, wearing running shoes, steps on a board with a nail in it and punctures his foot through the soft bottom of the shoe.
A volunteer, moves a limb to a pile beside the road, passes another volunteer and the second is struck in the eye.
A man cleaning a lawn, under a willow tree, is hit in the top of the head by a small falling limb and it stabs him in the top of his head causing injury and a quick trip to the emergency room.
A chainsaw operator cuts a storm fallen tree. The root system, bent over underground, and when the trunk is severed the remaining trunk stands rapidly back up. A child was in the area playing while adults were working the tree clean up. The child was crushed and killed under the roots.
A homeowner rushes around his property after a storm trying to pick up debris and remove a fallen tree in his back yard. He approaches the fallen tree and steps on a wire, thinking the power is off, and is electrocuted.
A chainsaw operator with a recently purchased saw was pushing, the now dulling or dull saw, through a limb on a storm fallen tree. The limb was bent and loaded with pressure and when the saw finally made it through the cut the saw was thrown quickly back toward the operator’s left leg. He was rushed to the emergency room.
A storm clean up volunteer was assisting, by pulling brush and limbs to a pile behind a chainsaw operator. As the limb was pulled it caused a pinch of the saw bar and the operator pulled the saw free and into his right leg just above the ankle.
A worker was assisting a chainsaw operator by pulling brush from the debris line. The chainsaw operator turned around, not knowing the position of the worker, and cut the worker pulling brush in the right arm.
A chainsaw operator is cutting a top clear on a wind broken tree when another chainsaw operator decides to fell the standing trunk. The operator on the top is quickly knocked down with his saw to the ground.
I have spoken to many groups over the years on chainsaw applications and most deal with the use of a saw after a storm at some point. The stories above- all came from real stories related to me during breaks and conversations.
I have found, in my experience anyway, that once a storm takes place it’s too late for training. Yes, review can be suggested and plans can be formulated but the information needed to be in practiced regarding saw maintenance and cutting techniques will not be taken into use and reality once the volunteering at the work site begins. Unless, the basis of knowledge is already in place the safety will not be in place.
Safety is an awareness of the things that can cause accidents and injury. You cannot put together a plan to prevent accidents if you are unaware of the issues that may cause them.
Volunteer groups have been organized in several areas across the country for cleanup work on recent floods and tornados. Organizing groups like the Baptist Disaster Relief and Samaritan’s Purse have extensive training programs to train volunteers prior to storm needs. FEMA and the Red Cross teams utilize these organizers as well as their own. However, there are many Church and Civic Organizations that want to help, and because of the many needs, thousands of volunteers approach storm clean up operations with little or no awareness training.
A smaller organizer(s) should work hard to plan the storm! Seek the experience of some of the larger groups for training prior to the need. Understand please that you cannot wait until the need arises to gain the training knowledge and awareness. At a minimum, the need to have key people trained to be able to organize the volunteers and have needed equipment and tools ready to go should be in place.
From a chainsaw operations standpoint:
Have your equipment ready to go. The chainsaw(s) to be used must be in top working condition. The Operator’s Manual should accompany the saw along with any necessary tools specific to the unit. Operators should be familiar with the particular saw type before work begins.
Spare guide bars and saw chains should be with the saw(s) to the storm worksite.
Mixed fuel and chain oil should be located and supplies planned ahead to accomplish the work.
Sharpening systems must be considered and or located and an operator must practice and understand when a chain is sharp and dull. When the chain needs sharpening. A dulled saw chain is relatively more dangerous in storm damage work.
Personal Protective Equipment (PPE) is to be required of all chainsaw operators on the worksite. NO exceptions! Head, eye, ear, hand and leg protective wear as well as boots should be on all chainsaw operators. If volunteers show up with chainsaws they should not use them on the worksite without having proper PPE in place.
A plan of work for the area involving the chainsaw operators should be formulated and supervised by the trained organizing/team leader. The chainsaw operator’s tasks should begin with lead-time from the dragging, brushing and moving debris work. In some cases larger equipment will need to be in place in the plan before ground volunteers/workers are brought into the worksite. The work of pulling and moving the debris must be time spaced after the sawing. It doesn’t have to be more than just a few minutes separated, but distance (time space) needs to be between chainsaws, equipment and workers on the ground moving debris.
Workers do not hold limbs, logs, etc for the chainsaw operator’s to cut.
Large equipment does not hold limbs or logs for chainsaw operators to cut. Move it to location for safe cutting.
Workers/volunteers moving debris by hand should have heavy-duty footwear with traction soles. Preferably high top work boots with ankle support. No running shoes, sneakers or sandals allowed. Safety glasses and work gloves are required. If debris, limbs and standing trees are still over the worksite, hardhats are required. In some site conditions a dust mask is required. According to the task, but especially with tree debris work, long pants and long sleeve shirts are proper work apparel.
You may think of a few more bullet points for storm planning that can be added to these. I am continuing to compile more as I think though what’s needed in different storm scenarios. Elvex Safety has agreed to sponsor and produce a storm planning video to include these thoughts and also the most important cutting techniques related to chainsaw operations. Visit www.forestapps.com and subscribe to our free ChainPoint eNews for more future details.
Forest Applications Training, Inc. is a training company with over 20-years of history specializing in chainsaw applications and safety for logging, tree care, government agencies and disaster relief. Tim Ard is the President and Lead Instructor and has conducted chainsaw training in over 40 states. For information call 770-222-2511 or write info@forestapps.com .
© Copyright 2011 Forest Applications Training, Inc. Reprint with permission acceptable. info@forestapps.com
- Posted using BlogPress from my iPad
Monday, May 2, 2011
Kick Back...
By Tim Ard, Forest Applications Training, Inc.
Too often I hear the term used... Someone using a chainsaw and a cut happens to someone's leg or other body area and the culprit is defined as... Kick Back.
Kick Back, from a chainsaw definition, is a reactive force that is produced by the rotating saw chain as it ascends around the upper guide bar nose. When the saw chain is touched or pinched as it goes around this area, the reaction is an upward rotation of the guide bar tip, it rotates upward in the direction the bar is aligned. Too often toward the operator.
It is my own theory, collected from questioning those attending class that have been previously cut with a chainsaw, that many times the term Kick Back has two definitions. The second occurrence is not related to the chainsaw directly, but to what it is cutting. Many times the chainsaw is thrown back toward the operator by the pressures held in the wood material or limb being cut. One such situation is what we describe as a Spring Pole. You can read more about Spring Poles in articles on our website www.ForestApps.com.
Other situations that may cause a saw to be thrown toward the operator may be described as movement caused by side binds, weight and pivots that are sometimes difficult to recognize as we make cuts with the saw on a downed tree. The tree may be over a stump, ridge or other pivot that when cut may come up or go down quickly when the piece is severed. A limb may be held down on the end and when a covering limb or support is severed the movement can be inches or in some cases feet. This quick movement can surprise even the best of us.
The answer to controlling either type of Kick Back? Plan each cut thoroughly. Make sure your footing and body position are such to control any saw movement. Maximize your reaction time by considering the possible movement of the material or the chainsaw. Use a sharp saw chain when working. Pushing and pulling on a saw, because of dull chain, is not something you want to deal with when standing next to material that may be loaded. Pushing may even further load the situation too...
Always wear Personal Protective Equipment when operating a chainsaw. Even the best of plans may miss a little something and could end in an unplanned accident event. PPE can sometimes lessen an injury should an accident occur...
Kick Back of any type is important to understand and your ability and knowledge of it is the key. Read about it in your chainsaw's operators manual and then visit our website for more applications.
More info at www.ForestApps.com
- Posted using BlogPress from my iPad
Monday, April 25, 2011
Chap up...
Chap Up…
By Tim Ard, Forest Applications Training, Inc.
Chainsaw operators for many years have known about the positive aspects of the leg protective saw chap. Every month though it seems I come across people that didn’t know chaps are available and don’t understand how they work nor their ever increasing need to put them on.
Loggers in the Western USA and the US Forest Service have been using them for decades now and they are increasing in popularity in all the states. Why you say? Because it hurts to be cut by a chainsaw and many of the injuries happen to the operators legs.
Leg protection garments work from what is called the process of jamming. The fiber padding in the chap leg is designed to pull out and jam the chainsaw chain, bar and sprocket to slow the speed of the saw chain and intentionally stop the chain rotation. The process doesn’t mean in every situation that chaps will prevent injury but the intention is to give reaction time and hopefully reduce the injury should the accident occur. I hear almost weekly testimonies of how chaps prevented cuts in accident situations.
Most all leg protection garments have a layered pad of what is called ballistic nylon. These nylon fibers are used in bullet resistant body armor, thus the term ballistic came about. Some are out of a fiber that is white in color and often called warp-knit. Some of the first on the market were from DuPont’s Kevlar® which is a yellow colored fiber. Some others have a combination of both fibers. The fiber is important but the real ability to work with the saw chain is how it’s woven and how the multiple layers are constructed in the pad.
A relatively new padding on the market is available from Elvex Safety. The fiber combination is called Elvex Prolar®. This Prolar® material, used in their leg protection products, is designed specifically for chainsaw leg protection. The material when hit by the moving saw chain pulls out and wraps the saw drive system as others but then it appears to explode (so to speak, it expands) and jams quickly. The result is a new generation Elvex ProChaps tested in compliance by Underwriter’s Laboratories in accordance with ASTM F-1414, Measurement of Cut Resistance to Chain Saw Lower Body Protective Clothing. http://www.elvex.com/forestry-safety-videos.htm
It is important too that leg chaps are comfortable and the design is such that it covers the legs in a fashion that reduces the chance of twist. If the straps are uncomfortable or the position of the leg pad is not positioned correctly, the chain will find its way to your leg. A design that seems to work best with this twist possibility is one called asymmetric. The pad is positioned slightly to the left of the chap leg to aid in preventing the twist, giving more coverage area and reaction time.
Outer materials of the garment you choose is related to the amount of wear you plan. There are lighter weight and heavy weight outer materials, usually of Cordura® fabrics. The pads are the same, so it doesn't effect their protection. There are a variety of sizes and lengths however that can effect safe coverage. You want to make sure to cover from your groin area to the top of your footwear. Also available are full wrap designs that cover the back of the leg, your calf area.
Two labels important to look for when purchasing are the testing classification label and the care instruction label. Make sure your chaps are designed for chainsaw protection and that you can easily clean them when they become soiled. Dirty, oil soaked protection pads may reduce the ability for the chain to pull out the jamming fibers and enable it to better cut through. Keep them clean…
My emphasis during training workshops is to never use your saw without Leg Protection and other important PPE items of Head, Hand, Eye, Ear, Face and Foot Protection. The ever-increasing need I wrote of earlier is simply - it costs more to repair you, a friend or family member, than ever before. Make sure you have it and use it!
For more information visit our website www.ForestApps.com
© Copyright 2011 Forest Applications Training, Inc.
Thursday, April 21, 2011
Storm Training
Storm Debris Training
By Tim Ard, Forest Applications Training, Inc.
This article outlines a program that is going very well in our portfolio of training workshops. It is the ideal third level day to our hands-on chainsaw training. The workshop is formatted to follow our two-day workshop on felling because a thorough understanding of planning and the workings of the hinge must be in place to maximize the day in pressures and binds.
The workshop begins with a review of planning the worksite and then focuses on each individual cut made on the downed storm tree. Storm hazards, pressures and binds and then a variety of techniques are shown and explained. Ever used hinges to remove a tree that is wind thrown, hung or up against a cable or object? Are sharpening and adjustments of your chainsaw important? All is covered in this workshop.
The day is formatted with the hands on fieldwork accomplished in teams, which is important to most all storm work. Learn to communicate with others in your team and work the tree with minimum fatigue and avoiding workplace injury.
For more information or schedule a Storm Debris workshop contact or Forest Applications Training, Inc. office. Ph. 770-222-2511 or email info@forestapps.com Contact us today… storms happen daily.
Sunday, April 10, 2011
Techniques
Techniques
By Tim Ard, Forest Applications Training, Inc.
The past week I have had several great experiences with workshops across Pennsylvania. As always, it is a pleasure to meet and learn from attendees and pick up understandings, new ways of communicating, chainsaw applications and safety for the future. Some thoughts came to me that I would like to share with you… on Technique.
What is a Technique or where do Techniques come from? Technique is a way of doing something that someone has been taught or learned from one’s experience in accomplishing a task. Sound logical?
How do we know what we are using is the best, safest Technique for the application? Is it because we have seen it, believe in it - or is it because we tested with our plan the Technique’s ability to accomplish our task…. Luck or fact? Experience!
I published an article recently on (taking/observing) tree lean information in the planning process. It’s how I was taught to make sure the information of lean, that I observe and confidently place into my felling plan, would afford me accurate results. The way I was instructed seems to be different than a lot of understanding out in the field. I understand there may be other ways to read the weighted lean of a tree but you know the lean is only part of a great, safe and productive way of felling a tree.
So, how do I know a good Technique? What’s right? What’s wrong?
Simply to begin the answer, lean is not a Technique, part of, but not a Technique. It is one of the most important parts of forming a complete plan and final Technique selection. It remains the hardest part of tree felling for most of us to grasp. It’s a major reason trees go directionally wrong. Because of lean we commonly find our position to be in the wrong place and someone or our saw pinched by the unexpected movement of the tree.
Now, to pass along my thoughts of the Technique selection process I have to better understand every part. For making my point, I am choosing to seek a better platform or illustration of the way lean effects the Technique used in felling a tree.
Technique Exercise
To complete the experiment you will need (1) a string and (2) a weight of some type on the end of the string. You also need (3) a piece of paper with a line drawn on it or a line drawn on the ground. Ready?
Make a plumb line by attaching the weight to the string. Allow the weight to swing free on the string. You have now built a plumb line that will designate a measure of gravitational pull. The weight now centers itself to the earth.
Draw a line on a piece of paper or the ground. That line represents your holding wood or hinge on the stump of your tree. It’s the pivot point or fulcrum on the stump that the tree will pivot on, forward or back. This exercise is illustrating only forward or back lean. (If the hinge does not break and holds the tree attached, the side weight is not a factor in the fall. As with a door, the tree will pivot to the targeted latch on the hinge).
Hold the plumb line in your hand above and on the line (hinge). Your hand represents the center of the crown of the tree. Now line up the plumb line with the line on the ground. At this position your tree is perfectly straight, balanced on the hinge.
Now move your treetop (hand) backward. You have just moved your tree crown’s center weight behind the pivot. The weight of your tree and crown just became back lean.
Move your treetop (hand) forward. You have just moved your tree crown into a forward position in relationship to your pivot hinge. Your tree just became a forward leaner.
Just as you could not deny or change the reading of gravity by your plumb line, you cannot deny the fact that the center weight of your tree crown, in relation to the pivot line (hinge), places the center of your crown into a forward or back lean condition.
Understanding the above, the face notch does not make the tree lean, tilt or swing. The notch allows the hinge to work during the pivot on the hinge but doesn’t change the trees weight movement. With this understanding, if your back cut is not considering the forward or back weight movement in position of the hinge, you will lose control of the tree or the tree will set down on your chainsaw bar. The tree must be supported (wedge or rope) or lifted forward from back lean positions.
Not to have an unplanned, accident event… you must look for Hazards and obstacles, measure and note the two Leans, prepare and use an Escape or retreat path, have a clear plan of Hinge placement and dimension and finally Back cut the fiber up to the hinge, supporting the tree or releasing the tree at a preplanned predetermined time.
Before you begin cutting – Prepare and wear your P.P.E. Make sure your saw is up to condition. If you do not know these, review your manufacturers’ operator’s manual before you pull the starter rope.
There’s not a reason to debate other issues of tree falling until you understand how to measure the two leans and assess the other areas of plan information to form a solid Technique.
I hope this article helps? Questions or comments? Contact Tim by email TimArd@ForestApps.com
Visit www.forestapps.com for more information on planning, techniques and training the operator in chainsaw applications.
© Copyright 2011 Forest Applications Training, Inc.
Monday, March 28, 2011
Clearing the Road
By Tim Ard, Forest Applications Training, Inc.
If a storm or natural process leaves debris for you to utilize your chainsaw skills on, what do you do? The treetop is in the road and you and your saw have to make movable pieces of it. Where you start may mean the difference between a little work and a lot of hard risky work. It could even mean injury or death to you or someone else with you.
So what do we do? How do we make a plan to complete this task the quickest and best that it can be done and safely...?
In most implementations of the storm cleanup process I see (and hear of), the operators simply grab a chainsaw, start it up and begin cutting the end of the tree that's over the road. Sound familiar? Is there another way?
A couple thoughts, I guess you could call them techniques; I've come to appreciate...
• Look over the situation at hand from several angles. Walk around and identify any hazards overhead and around the project. Are there saplings or limbs bent over creating spring poles in the work area.
• Identify any possibility of roll over or twisted side binds that you see. Could your feet and legs be quickly swept out from under you by side-to-side a movement?
• Is the trunk and now horizontal canopy going to come down with each cut or may that cut unleash up pressure that may come at you.
• What about backpressure from limbs imbedded and pushing back or the possibility of the tree sliding forward or down an embankment.
• Know the top four information steps before you make a cut. Repeat them over and over as you plan and execute each cut.
• Make sure your chainsaw is running up to the manufacturers specs and that your saw chain is sharp and cutting at it's best. Pushing and pulling are not techniques that are neither beneficial nor safe when cutting downed debris.
Does your plan begin at the crown in the road? Could it be that you could better accomplish the task to clear the road or area by starting at the butt of the tree? People ask me all the time what I mean with that statement. I will try to clarify...
• If I start at the end or crown of many trees it constitutes the need to cut high, sometimes higher than you should without a pole saw. Never cut above your shoulders with the saw and if you have to lift the saw a little high, make sure to turn the bar almost sideways to eliminate being right in line with the reactive kick-back forces and the cutting chain. Don't just cut with the spinning chain pointed right inline with your head and body. When you lift the saw very high or up and down often fatigue rises quickly. Fatigue and saw work do not mix well, like drinking, fatigue and driving.
• When you cut the limbs of the crown from the end, you generally have to cut and then stop and pull them out and down and maybe even out of the way.
• The limb ends, or top pieces, are usually smaller diameter and vibrate as the chain pulls them about. This increases chances of chain derailing and limbs throwing the saw about, usually at a level even with the upper body.
• More cuts on small limbs have to be made to start at the top.
The Alternative
• Begin at the butt end. It may be that you can start right at the stump. It often is better in your plan to move up the trunk to the edge of the road or first major crotch to begin the process. Try not to pass any limbs unless you are using them as support or scotches.
• When removing limbs up the trunk it's easier to maintain saw control at a lower level. You can work up the trunk removing limbs and having room to move and leaving some debris until you're out of the immediate area before swamper’s move it. Leaving the debris momentarily can even be used as roll protection or support. Moving should be practiced with the chain brake engaged and make sure to have a plan in mind and stabile footing before making the next cut.
• The neat part of de-limbing up the trunk direction is that you can severe the limb close to the trunk and in many cases the swamper can pull the limb right out of the road or back to the chipper without having to cut so many times. Limb direction can easily be changed too without having to do so much manhandling to get it off the road. Many trees you can remove and drag less that a dozen limbs to clear the road instead of fifty cuts on small pieces, making fifty trips to the roadside or chipper.
Just step back and look at your next tree cleanup project and you will see what I mean...
Please think about this too - Only one person with a saw on the tree until the tree is stabilized. You do not want one person cutting the trunk and another cutting limbs until these two sections are disconnected and stabile.
You don't want anything to roll over on another sawyer or someone pulling brush. Make sure to give enough distance between the sawyer and the swamper or brush tender.
Don't hold limbs waiting on them to be cut. Let the cuts be made, then come in when the Sawyer requests your help. Working too close together or trying to hurry the process and saw contact is inevitable.
Always wear Your Personal Protective Equipment when you operate a chain saw. Head, eye, ear, gloves, leg protection and boots are the best insurance you can have against personal injury, along with a complete cutting plan.
For more on this topic and many other chain saw safety thoughts and techniques visit www.ForestApps.com
Tim Ard is president of Forest Applications Training, Inc. Contact Tim with any questions or for further explanations at info@ForestApps.com. We specialize in training operators of outdoor power equipment at city, county and state levels nationwide.
© Copyright 2011 Forest Applications Training, Inc.
- Posted using BlogPress from my iPhone